Fully automatic mixing integrated grouting pump operation method
Date:
2023-11-03
The traditional production methods of fully automatic mixing integrated grouting pumps are generally concrete impermeable walls (ground-to-wall) and high-pressure rotary spraying.This hole does not return to the pulp, and when the adjacent hole returns to the pulp, the main parameters will not change, and everything will improve normally.
The traditional production methods of fully automatic mixing integrated grouting pumps are generally concrete impermeable walls (ground-to-wall) and high-pressure rotary spraying.This hole does not return to the pulp, and when the adjacent hole returns to the pulp, the main parameters will not change, and everything will improve normally.Fourth, for some pebble gravel layers with very little sand content, the method of pre-grouting clay cement mortar in the waterproof casing can also be used to deal with the problem of geological structure grouting.Pouring light-quality foamed concrete wall grouting machinery and equipment are mainly used for grouting the internal and external walls of light steel structure villas and wall engineering buildings, light steel keel partition wall mesh molds and composite self-preservation walls.It solves the strict management of the water-to-ash ratio of cement mortar concrete and the grouting working pressure in the engineering project, and can easily grout the cement mortar within the scope of the concrete water-to-ash ratio design scheme.The equipment greatly reduces the soot concentration value next to the machine and at the nozzle, improves the office environment of employees, and reduces the dust caused by dust.The anti-floating bolt screw compressor grouting integrated body is small in size and has good engineering construction characteristics.The mixing equipment is mainly used for grouting and stirring in the whole process of pouring concrete, and the mixing table is rotated to continuously rotate the grouting machine.
Light-duty steel structure wall mixing pump mixing mortar grouting machine is lightweight, powerful and easy to use. Other features: ·High suction, high aspect ratio, 5 meters of water flow; ·Can be dual.Or external equipment (such as swirling solid-liquid separators, magnetic filtration devices, etc.), minimize the occurrence of the above five invalidations, and maintain the excellent operating state of the machine seal.This kind of method is aimed at more critical places.After discovering everything, be sure to stop the car immediately, open the laxative valve, and detect the fault after there is no working pressure.The equipment is mainly composed of sound card rack, grouting, mixing, transmission system, underwater concrete, household appliances and safety maintenance.The sound card rack is an integrated structure made of angle iron and plate electric welding, which has stiffness.The bottom end of the sound card rack is equipped with a re-tape so that.The transmission system is composed of an electric motor and a reducer, with a compact structure and easy installation.Underwater concrete is a part of the work of double pumps, which mainly includes the camshaft, crankshaft, roller, cylinder, valve chamber, etc. in the work.The mixing part uses a column-type two-layer mixer, the top layer is the mixing barrel, the next layer is the discharge barrel, and the surface of the mixing barrel has a sieve.This mortar spraying machine is suitable for: indoor and outdoor ceiling ceiling painting.
It causes plastic deformation of the sand, but does not cause rupture and destruction of the sand.After the construction of the project is over, everyone needs to maintain a good habit. The cement mortar grouting machine|concrete grouting machine should be cleaned up immediately to prevent the slurry from solidifying in the machinery and equipment and causing the machinery and equipment to be destroyed.The total flow rate of cement mortar grouting machine|concrete grouting machine can be adjusted according to the gate valve.In order to meet the requirements of the slurry preparation design plan.Machines that don't have such a thing have great benefits, which can make the service life of our cement mortar grouting machine|concrete grouting machine application longer.Install the SM-RPC pipe, which doubles as an accurate measurement of the thickness of the second lining of the concrete, and is used to determine whether the concrete in the vault is the basis for the concrete pouring process; a camera is installed on the top of the second lining edge template to carry out a real-time monitoring system of the cast-in-place concrete, and it is transmitted to the central control room to reasonably supervise the grouting quality of the second lining concrete.Immediately after the second-lined cast-in-place concrete is carried out, the mold grouting is carried out according to the axial grouting pipe of the embedded parts to achieve the compactness of the second-lined filling of the vault, and the cement mortar and the second-lined concrete can produce the overall structure.
Related News
Tianjin Juneng High-pressure Pump Co., Ltd.
No.10Jingtong Road, Beichen Economic and Technological Development Zone, Beichen District, Tianjin City China.
Sales Tel: +86-22-86879896 86879897-8000
Accessory：+86-22-86879895
Manager：+86-13602112500 Mr. Sun
Fax: +86-22-86879897-8002
E-mail: info@junengpump.net
Copyright © 2023 Tianjin Juneng High-pressure Pump Co., Ltd.